A flash of the battery and brake light on your car’s dash can be a worrying sight. But what does it actually mean?
In most cases, a flashing battery and brake light simply indicate that your car’s battery is running low and needs to be recharged. However, it can also be a sign of a more serious problem, such as a faulty brake light switch or a problem with your car’s charging system.
If you see your battery and brake light flashing, it’s a good idea to get your car checked out by a mechanic as soon as possible. In the meantime, here’s a closer look at the possible causes of this problem.
Also Read: Subaru Security Light Flashing
Table of Contents
What Could Be Causing My Battery and Brake Light to Flash?
There are a few different reasons why your battery and brake light might start flashing. The most common cause is simply that your car’s battery is running low and needs to be recharged.
If your car has been sitting for a while, the battery may have run down due to lack of use. Alternatively, if you’ve been using your car’s electrical accessories (like the headlights, stereo, or air conditioning) a lot, this can also drain the battery.
Another possible cause of a flashing battery and brake light is a problem with your car’s charging system. This could be something as simple as a loose connection between the battery and the alternator. Or, it could be a more serious issue, such as a faulty alternator.
Furthermore, a flashing battery and brake light can also be caused by a problem with your car’s brake light switch. If the switch is faulty, it may cause the brake light to stay on, even when the brakes are not being applied. This can drain the battery and cause the light to flash.
What Are the Consequences of Ignoring a Flashing Battery and Brake Light?
Your car’s battery and brake light are two of the most important warning lights on your dashboard. If either of these lights is flashing, it’s a sign that something is wrong and you should take action immediately.
Ignoring a flashing battery light could mean that your battery is on the verge of dying. If you continue to drive without addressing the problem, you could find yourself stranded on the side of the road with a dead battery.
Similarly, ignoring a flashing brake light could also have dangerous consequences. If your brake light is on, it means that your brake pads are wearing down and need to be replaced. If you don’t replace them in a timely manner, you could find yourself in an accident.
So, if you see either of these warning lights flashing, don’t ignore them! Pull over and take care of the problem as soon as possible.
Related warning lights: Lightning Bolt Dodge Ram Warning Light Symbol Guide
Can I Fix the Problem on My Own?
In some cases, you may be able to fix the problem on your own. For example, if your battery is dying, you may be able to give it a jump start. However, it’s always best to consult a professional to be sure.
If your brake light is on, you’ll need to replace your brake pads. This is a relatively easy task that you can do at home, but you’ll need to purchase the brake pads beforehand.
Of course, the best course of action is to take your car to a mechanic and have them fix the problem for you. This way, you can be sure that the problem is fixed properly and won’t come back to haunt you later.
Also Read: how long can you drive with battery light on?
How do Replace My Car Battery and Change the Brake Pads?
If you’ve decided to take care of the problem yourself, here’s a quick guide on how to replace your car battery and change your brake pads.
Replacing your car battery is a relatively simple task. You’ll need to purchase a new battery and some tools, including a wrench and a screwdriver. Once you have everything you need, follow these steps:
- Open your car’s hood and locate the battery.
- Disconnect the negative terminal first, then the positive terminal.
- Remove the old battery and install the new one.
- Reconnect the terminals and close the hood.
Changing your brake pads is also a relatively simple task. You’ll need to purchase new brake pads and some tools, including a wrench and a screwdriver. Once you have everything you need, follow these steps:
- Use a jack and open your car wheel using a wrench
- Use a screwdriver to remove old brake pads
- Replace brake pads with a new one.
- Tighten the brake pads screw
- Put back your wheel just like you have opened it.
- Tighten the wheel bolt as much as you can.
That’s all there is to it! With these simple steps, you can fix the problem yourself and avoid the consequences of ignoring a flashing battery and brake light.
Related brake pads: Best Brake Pads for Subaru Forester
Problem do not call before coming. So, if you see your cars miter flashing battery and brake light, here are a few tips to help you deal with them:
- Try not to use your car’s electrical accessories. This includes the headlights, stereo, and air conditioning.
- If possible, avoid using your car altogether until you can get it to a mechanic.
- If you must use your car, drive carefully and avoid hard braking.
- Keep an eye on your car’s gauges and watch for any other warning lights that may come on.
- If your car starts to lose power, pull over to the side of the road and turn off the engine.
Following these tips will help you to avoid any further damage to your car and get it to a mechanic as soon as possible.
Also Read: what does oil can and wrench light mean?
A flashing battery and brake light on your car’s dash is usually a sign that your car’s battery is running low and needs to be recharged. However, it can also be a sign of a more serious problem, such as a faulty brake light switch or a problem with your car’s charging system. If you see either of these warning lights flashing, don’t ignore them! Pull over and take care of the problem as soon as possible.
Originally from England, I’ve been repairing cars for over 16 years and am an automotive journalist. I’ve been working on cars for as long as I can remember, and it’s one of the best jobs I’ve ever had.
It is my intention to be your mechanic friend, that person who will assist you with any problem you may have with your vehicle and explain in detail how the problem can be fixed to you as soon as possible.
I produce and anchor a weekly auto news program. As well as providing insights into all things automotive, including expert analysis of the latest trends in the automotive industry, and ensuring you always know where to go for the latest automotive news, I also provide insight into all things automotive before the news breaks.
If I am not working, I am a riding motorcyclist and I do volunteer work with local charities whenever I have time. When I’m not riding my motorcycles or volunteering at local charities, you will find me at home in Portland, Oregon.